This 'underneath' photo shows the steam pipe in white which runs down the centre of the loco under the water tank.
|Curved white steam pipe descending from the engines above|
Progress today was to attach the small bore pipes from the engines to a 'Y' piece which connects to the wider bore steam feed pipe.
|Rear engine viewed from right hand side|
|View from left hand side, front engine on the left|
|The pipe from above|
|And the next job...|
All these pipe joints, bar the one at the bottom of the 'Y' piece, have used annealed copper washers with graphite grease. The one at the bottom of the 'Y' kept its original joint material but with new graphite grease.